Huawei Quidway S3700 Series Configuration Manual page 133
Hide thumbs
Also See for Quidway S3700 Series:
- Configuration manual (289 pages) ,
- Quick start manual (70 pages) ,
- Manual (69 pages)
Table of Contents
Advertisement
Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
l Configure CE1.
l Configure CE2.
Issue 01 (2011-10-26)
secondary-port ethernet 0/0/2 level 0
[UPEC-rrpp-domain-region1] ring 1 enable
[UPEC-rrpp-domain-region1] quit
# Configure UPE C as a transit node of ring 1 in domain 2 and specify primary and secondary
ports on UPE C.
[UPEC] rrpp domain 2
[UPEC-rrpp-domain-region2] ring 1 node-mode transit primary-port ethernet 0/0/1
secondary-port ethernet 0/0/2 level 0
[UPEC-rrpp-domain-region2] ring 1 enable
[UPEC-rrpp-domain-region2] quit
# Configure UPE B as an edge node of ring 2 in domain 1. Configure Eth 0/0/2 as the public
port and Eth 0/0/3 as the edge port.
[UPEC] rrpp domain 1
[UPEC-rrpp-domain-region1] ring 2 node-mode assistant-edge common-port ethernet
0/0/2 edge-port ethernet 0/0/3
[UPEC-rrpp-domain-region1] ring 2 enable
[UPEC-rrpp-domain-region1] quit
# Configure UPE B as an edge node of ring 2 in domain 2. Configure Eth 0/0/2 as the public
port and Eth 0/0/3 as the edge port.
[UPEC] rrpp domain 2
[UPEC-rrpp-domain-region2] ring 2 node-mode assistant-edge common-port ethernet
0/0/2 edge-port ethernet 0/0/3
[UPEC-rrpp-domain-region2] ring 2 enable
[UPEC-rrpp-domain-region2] quit
# Configure UPE C as an edge node of ring 3 in domain 1. Configure Eth 0/0/1 as the public
port and Eth 0/0/4 as the edge port.
[UPEC] rrpp domain 1
[UPEC-rrpp-domain-region1] ring 3 node-mode assistant-edge common-port ethernet
0/0/2 edge-port ethernet 0/0/4
[UPEC-rrpp-domain-region1] ring 3 enable
[UPEC-rrpp-domain-region1] quit
# Configure UPE C as an edge node of ring 3 in domain 2. Configure Eth 0/0/2 as the public
port and Eth 0/0/4 as the edge port.
[UPEC] rrpp domain 2
[UPEC-rrpp-domain-region2] ring 3 node-mode assistant-edge common-port ethernet
0/0/2 edge-port ethernet 0/0/4
[UPEC-rrpp-domain-region2] ring 3 enable
[UPEC-rrpp-domain-region2] quit
# Configure CE1 as the master node of ring 2 in domain 1. Configure Eth 0/0/1 as the primary
port and Eth 0/0/2 as the secondary port.
[CE1] rrpp domain 1
[CE1-rrpp-domain-region1] ring 2 node-mode master primary-port ethernet 0/0/1
secondary-port ethernet 0/0/2 level 1
[CE1-rrpp-domain-region1] ring 2 enable
[CE1-rrpp-domain-region1] quit
# Configure CE1 as the master node of ring 2 in domain 2. Configure Eth 0/0/2 as the primary
port and Eth 0/0/1 as the secondary port.
[CE1] rrpp domain 2
[CE1-rrpp-domain-region2] ring 2 node-mode master primary-port ethernet 0/0/2
secondary-port ethernet 0/0/1 level 1
[CE1-rrpp-domain-region2] ring 2 enable
[CE1-rrpp-domain-region2] quit
# Configure CE2 as the master node of ring 3 in domain 1. Configure Eth 0/0/1 as the primary
port and Eth 0/0/2 as the secondary port.
[CE2] rrpp domain 1
[CE2-rrpp-domain-region1] ring 3 node-mode master primary-port ethernet 0/0/1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
121
Advertisement
Table of Contents
