Huawei Quidway S3700 Series Configuration Manual page 113
Hide thumbs
Also See for Quidway S3700 Series:
- Configuration manual (289 pages) ,
- Quick start manual (70 pages) ,
- Manual (69 pages)
Table of Contents
Advertisement
Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
Step 2 Configure RRPP interfaces.
l Configure UPE A.
# Disable STP on the interfaces that need to be added to the RRPP ring on UPE A. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPEA] interface ethernet 0/0/1
[UPEA-Ethernet0/0/1] port link-type trunk
[UPEA-Ethernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPEA-Ethernet0/0/1] stp disable
[UPEA-Ethernet0/0/1] quit
[UPEA] interface ethernet 0/0/2
[UPEA-Ethernet0/0/2] port link-type trunk
[UPEA-Ethernet0/0/2] port trunk allow-pass vlan 100 to 300
[UPEA-Ethernet0/0/2] stp disable
[UPEA-Ethernet0/0/2] quit
l # Configure UPE B.
# Disable STP on the interfaces that need to be added to the RRPP ring on UPE B. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPEB] interface ethernet 0/0/1
[UPEB-Ethernet0/0/1] port link-type trunk
[UPEB-Ethernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPEB-Ethernet0/0/1] stp disable
[UPEB-Ethernet0/0/1] quit
[UPEB] interface ethernet 0/0/2
[UPEB-Ethernet0/0/2] port link-type trunk
[UPEB-Ethernet0/0/2] port trunk allow-pass vlan 100 to 300
[UPEB-Ethernet0/0/2] stp disable
[UPEB-Ethernet0/0/2] quit
l Configure UPE C.
# Disable STP on the interfaces that need to be added to the RRPP ring on UPE C. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPEC] interface ethernet 0/0/1
[UPEC-Ethernet0/0/1] port link-type trunk
[UPEC-Ethernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPEC-Ethernet0/0/1] stp disable
[UPEC-Ethernet0/0/1] quit
[UPEC] interface ethernet 0/0/2
[UPEC-Ethernet0/0/2] port link-type trunk
[UPEC-Ethernet0/0/2] port trunk allow-pass vlan 100 to 300
[UPEC-Ethernet0/0/2] stp disable
[UPEC-Ethernet0/0/2] quit
l Configure PE-AGG.
# Disable STP of the interfaces that need to be added to the RRPP ring on PE-AGG. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[PE-AGG] interface ethernet 0/0/1
[PE-AGG-Ethernet0/0/1] port link-type trunk
[PE-AGG-Ethernet0/0/1] port trunk allow-pass vlan 100 to 300
[PE-AGG-Ethernet0/0/1] stp disable
[PE-AGG-Ethernet0/0/1] quit
[PE-AGG] interface ethernet 0/0/2
[PE-AGG-Ethernet0/0/2] port link-type trunk
[PE-AGG-Ethernet0/0/2] port trunk allow-pass vlan 100 to 300
Issue 01 (2011-10-26)
Instance
Vlans Mapped
0
1 to 4, 7 to 9, 12 to 99, 301 to 4094
1
5 to 6, 100 to 200
2
10 to 11, 201 to 300
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
101
Advertisement
Table of Contents
