Huawei Quidway S3700 Series Configuration Manual page 252

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
Procedure
Step 1 Create VLAN 10 and add interfaces to VLAN 10.
Step 2 Enable EFM OAM globally on Switch A and Switch B.
# Configure Switch A.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] efm enable
[SwitchA] interface ethernet 0/0/1
[SwitchA-Ethernet0/0/1] bpdu enable
[SwitchA-Ethernet0/0/1] efm mode passive
[SwitchA-Ethernet0/0/1] efm enable
[SwitchA-Ethernet0/0/1] quit
# Configure Switch B.
<Quidway> system-view
[Quidway] sysname SwitchB
[SwitchB] efm enable
[SwitchB] interface ethernet 0/0/1
[SwitchB-Ethernet0/0/1] bpdu enable
[SwitchB-Ethernet0/0/1] efm enable
[SwitchB-Ethernet0/0/1] quit
Step 3 Configure Ethernet CFM between the Switch B and Switch C.
# Configure Switch B.
[SwitchB] cfm enable
[SwitchB] cfm md md1
[SwitchB-md-md1] ma ma1
[SwitchB-md-md1-ma-ma1] map vlan 10
[SwitchB-md-md1-ma-ma1] mep mep-id 1 interface ethernet 0/0/2 outward
[SwitchB-md-md1-ma-ma1] remote-mep mep-id 2
[SwitchB-md-md1-ma-ma1] mep ccm-send enable
[SwitchB-md-md1-ma-ma1] remote-mep ccm-receive enable
[SwitchB-md-md1-ma-ma1] return
# Configure Switch C.
<Quidway> system-view
[Quidway] sysname SwitchC
[SwitchC] cfm enable
[SwitchC] cfm md md1
[SwitchC-md-md1] ma ma1
[SwitchC-md-md1-ma-ma1] map vlan 10
[SwitchC-md-md1-ma-ma1] mep mep-id 2 interface ethernet 0/0/2 outward
Issue 01 (2011-10-26)
Create VLANs and add interfaces to the VLANs.
Configure EFM OAM between Switch A and Switch B.
Configure Ethernet CFM between the Switch B and Switch C.
Configure EFM OAM between Switch C and Switch D.
Configure association between an EFM OAM module and an Ethernet CFM module on
Switch B and Switch C.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Ethernet OAM Configuration
240