Huawei Quidway S3700 Series Configuration Manual page 263
Hide thumbs
Also See for Quidway S3700 Series:
- Configuration manual (289 pages) ,
- Quick start manual (70 pages) ,
- Manual (69 pages)
Table of Contents
Advertisement
Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
l Configure UPEC.
l Configure PE-AGG.
Step 3 Create RRPP domains and configure protected VLANs and control VLANs.
l Configure UPEA.
l Configure UPEB.
l Configure UPEC.
l Configure PE-AGG.
Issue 01 (2011-10-26)
[UPEB-Ethernet0/0/2] stp disable
[UPEB-Ethernet0/0/2] quit
# On UPEC, disable STP on the interfaces to be added to the RRPP ring. Configure the RRPP
interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPEC] interface ethernet 0/0/1
[UPEC-Ethernet0/0/1] port link-type trunk
[UPEC-Ethernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPEC-Ethernet0/0/1] stp disable
[UPEC-Ethernet0/0/1] quit
[UPEC] interface ethernet 0/0/2
[UPEC-Ethernet0/0/2]port link-type trunk
[UPEC-Ethernet0/0/2] port trunk allow-pass vlan 100 to 300
[UPEC-Ethernet0/0/2] stp disable
[UPEC-Ethernet0/0/2] quit
# On PE-AGG, disable STP on the interfaces to be added to the RRPP ring. Configure the
RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[PE-AGG] interface ethernet 0/0/1
[PE-AGG-Ethernet0/0/1] port link-type trunk
[PE-AGG-Ethernet0/0/1] port trunk allow-pass vlan 100 to 300
[PE-AGG-Ethernet0/0/1] stp disable
[PE-AGG-Ethernet0/0/1] quit
[PE-AGG] interface ethernet 0/0/2
[PE-AGG-Ethernet0/0/2] port link-type trunk
[PE-AGG-Ethernet0/0/2] port trunk allow-pass vlan 100 to 300
[PE-AGG-Ethernet0/0/2] stp disable
[PE-AGG-Ethernet0/0/2] quit
# Configure the VLANs mapping instance 1 as protected VLANs in domain 1, and configure
VLAN 5 as the control VLAN.
[UPEA] rrpp domain 1
[UPEA-rrpp-domain-region1] protected-vlan reference-instance 1
[UPEA-rrpp-domain-region1] control-vlan 5
[UPEA-rrpp-domain-region1] quit
# Configure the VLANs mapping instance 1 as protected VLANs in domain 1, and configure
VLAN 5 as the control VLAN.
[UPEB] rrpp domain 1
[UPEB-rrpp-domain-region1] protected-vlan reference-instance 1
[UPEB-rrpp-domain-region1] control-vlan 5
[UPEB-rrpp-domain-region1] quit
# Configure the VLANs mapping instance 1 as protected VLANs in domain 1, and configure
VLAN 5 as the control VLAN.
[UPEC] rrpp domain 1
[UPEC-rrpp-domain-region1] protected-vlan reference-instance 1
[UPEC-rrpp-domain-region1] control-vlan 5
[UPEC-rrpp-domain-region1] quit
# Configure the VLANs mapping instance 1 as protected VLANs in domain 1, and configure
VLAN 5 as the control VLAN.
[PE-AGG] rrpp domain 1
[PE-AGG-rrpp-domain-region1] protected-vlan reference-instance 1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Ethernet OAM Configuration
251
Advertisement
Table of Contents
