Table of Contents
Advertisement
3.3.5. Calibration Due Date
The calibration due date feature (shown in
including the factory-set option to display the number of days remaining until the next calibration is
due.
Refer to
Section 5.7. Calibration Required
3.3.6. Service Due Date (Option)
This Service Due Date option – disabled by default – can be configured to:
• indicate briefly that service is due;
• indicate that service is overdue then pause awaiting user acceptance;
• force the user to switch the monitor OFF when service is overdue.
Options also exist for displaying the service due date, including displaying the number of days
remaining. In all instances, if enabled, the monitor only displays the message within 90 days of
service due date.
The service due date is illustrated in
3.3.7. Select Calibration Gas (Option)
This configurable option improves the accuracy of a reading by allowing the monitor to measure a
different flammable gas then the one used to calibrate the monitor.
The default is to select calibration gas in 'Setup'.
64171
Revision 12.1
Figure 14: Calibration Due
if calibration due date has expired.
Figure 14: Calibration Due Date
Figure 15: Service Due
Figure 15: Service Due Date
PORTABLE GAS MONITOR
Date) is configurable,
Date.
PS200
13
Advertisement
Table of Contents
