Display Qos-Interface Mirrored-To - Huawei Quidway S3900 series Command Manual

Command Manual – Mirroring
Quidway S3900 Series Ethernet Switches-Release 1510
Information displayed on the source mirroring group for remote mirroring includes:
Group number
Group type: remote-source
Group status
Information of the source port
Information of the reflector port
Remote-probe VLAN information
Example
# Display the parameter settings of the port mirroring group.
<Quidway> display mirroring-group all
mirroring-group 2:
type: local
status: active
mirroring port:
monitor port: GigabitEthernet1/1/4

1.1.2 display qos-interface mirrored-to

Syntax
display qos-interface { interface-type interface-number | unit-id } mirrored-to
View
Any view
Parameter
interface-type interface-number: port of the switch. If you enter this argument, the
switch will display the parameter settings of the specified port.
unit-id: Unit ID. If you enter this argument, the switch will display the parameter settings
on Unit.
Description
Use the display qos-interface mirrored-to command to display the parameter
settings of traffic mirroring.
Information displayed includes:
Port name and action name of traffic mirroring
Direction of traffic mirroring
ACL for identifying traffics
Destination port
Related command: mirrored-to
GigabitEthernet1/1/1
Huawei Technologies Proprietary
both
1-2
Chapter 1 Mirroring Commands