Front Wheel Installation - Honda CBR250R/RA Owner's Manual

Front Wheel Installation

1. Install the side collars into the left and
right side wheel hub.
2.
Position the wheel between the fork legs
and insert the front axle shaft from the
left side, through the right fork leg and
wheel hub.
To avoid damaging the brake pads while
installing the wheel, carefully fit the
brake disc between the pads.
3. Tighten the front axle nut to the specified
torque.
Front axle nut torque:
59 N·m (6.0 kgf·m , 44 lbf·ft)
4. Tighten the axle pinch bolt on the left
fork leg to the specified torque.
Axle pinch bolt torque:
22 N·m (2.2 kgf·m , 16 lbf·ft)
5. After installing the wheel, apply the brake
several times and then check if the wheel
rotates freely. Recheck the wheel if the
brake drags or if the wheel does not
rotate freely.
If a torque wrench is not used for
installation, see your dealer as soon as
possible to verif y proper assembly.
Improper assembly may lead to loss of
braking capacity.
http://mototh.com
97