Front Wheel - Honda CB160 Shop Manual

4. 12 FRONT WHEEL
D. Assembly
1. Couple the rear cushion spring and upper case,
push up the upper case, and install with the spring
seat limit. (Refer to Fig. 4. 68)
(CAUTION)
{a) When the spring seat limit is mounted, the
upper joint should be up. If it is not, mounting
becomes very difficult.
{b) The rear cusion spring has uneven pitch and
installation should be made with the small pitch
facing down. Fig. 4. 68 Coupling rear cushion
3. Install the rear cushion assembly to the rear fork
and frame by the 8 X 28 rear cushion bolt and 1 0
mm hex-cap nut.
4. 12 Front wheel
Fig. 4. 69 Front wheel
l
FRONT BRAKE ARM
73
\RM