Oil Pump - Honda INTERCEPTOR 2002 Service Manual

LUBRICATION SYSTEM
Clean the oil pan mating surface thoroughly.
Do nor
aopty sea1- Apply sealant (Three Bond 12078 or an equivalent)
ant more rhsn nee-
to the mating surface.
essary.
OIL PUMP
4-8
Carefully install the oil pan onto the lower crank-
case.
Install the oil pan mounting bolts.
Tighten the all bolts in a crisscross pattern in 2 - 3
steps.
Install the exhaust pipe (page 2-30).
Install the oil cooler hose joints (page 4-16).
Fill the crankcase with recommended oil (page 3-
14).
After installation, check that there are no oil leaks.
REMOVAL
Remove the clu tch assembly (page 9-15).
Remove the oil strainer (page 4-6).
Remove the bolt/washer, then remove the oil pump
drive/driven sprocket, clutch outer guide and drive
chain as an assembly.
Remove the three flange bolts and oil pump assem-
bly.