REP 1.10.1 LCD Display
Parts List on PL 1.6
Removal
When turning OFF the power switch, check that the 'Data' lamp is OFF and that there is
no Job in progress.
Turn OFF the power switch and make sure that the screen display turns OFF.
Check that the power switch is OFF and unplug the power plug.
1.
Open the Front Toner Cover.
2.
Remove the Fusing Unit Cover. (Figure 1)
a.
Remove the screw.
b.
Remove the Fusing Unit Cover.
Figure 1 j0mg40101
3.
Remove the Clip Cover or One Touch Panel. (Figure 2)
a.
Press the tab in the direction of the arrow to release the hook behind the tab and
remove the Clip Cover or One Touch Panel.
Repairs and Asdjustments
WARNING
4.
[One Touch Panel]: Disconnect the connector of the One Touch Panel. (Figure 3)
a.
Disconnect the connector.
5.
Remove the Control Panel. (Figure 4)
a.
Open the Control Panel in the direction of the arrow.
06/2014
4-12
Figure 2 j0mg40102
Figure 3 j0mg40103
Version 1.0
WC 5022/5024