Setting The Maximum Times Of Authentication Request Message Retransmission - Huawei Quidway S3500 Series Operation Manual

Operation Manual - Security
Quidway S3500 Series Ethernet Switches
Table 1-12 Configuring the maximum retry times for the switch to send version request
frame to the client
Configure the maximum retry times for the
switch to send version request frame to the
client
Return to the defaults
By default, the switch tries 3 times at the most to send version request frame to the
access user.
III. Configuring the timeout timer of version authentication
Perform the following in system view.
Table 1-13 Configuring the timeout timer of version authentication
Configure parameters of the timer
Return to the defaults
By default, ver-period-value is 1 second.
1.2.11 Setting the Maximum Times of Authentication Request Message
Retransmission
The following commands are used for setting the maximum retransmission times of the
authentication request message that the switch sends to the supplicant.
Perform the following configurations in system view.
Table 1-14 Setting the maximum times of the authentication request message
retransmission
Set the maximum times of the authentication
request message retransmission
Restore the default maximum retransmission
times
By default, the max-retry-value is 3. That is, the switch can retransmit the
authentication request message to a supplicant for 3 times at most.
Operation
Operation
Operation
Huawei Technologies Proprietary
1-11
Chapter 1 802.1x Configuration
dot1x
max-retry-version-value
undo dot1x retry-version-max
Command
dot1x timer ver-period ver-period-value
undo dot1x timer ver-period
dot1x retry max-retry-value
undo dot1x retry
Command
retry-version-max
Command