Huawei Quidway S3500 Series Operation Manual page 259

Operation Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches
Table 6-6 Configuring to filter the received route
Configure to filter the received routing
information distributed by the specified
address
Cancel the filtering of the received
routing information distributed by the
specified address
Configure to filter the received global
routing information
Cancel the filtering of the received
global routing information
II. Configuring to filter the distributed routes
Define a policy concerning route distribution to filter the routing information not
satisfying the conditions while distributing routes with the help of an ACL or address
ip-prefix.
Perform the following configuration in routing protocol view.
Table 6-7 Configuring to filter the distributed routes
Configure to filter the routes
distributed by the protocol
Cancel the filtering of the routes
distributed by the protocol
By far, the route policy supports importing the routes discovered by the following
protocols into the routing table:
direct: The hop (or host) to which the local interface is directly connected.
static: Static Route Configuration
rip: Route discovered by RIP
ospf: Route discovered by OSPF
ospf-ase: External route discovered by OSPF
ospf-nssa: NSSA route discovered by OSPF
bgp: Route acquired by BGP
If routing-process is BGP, you should also specify the process number or AS number
accordingly.
Operation
Operation
Huawei Technologies Proprietary
6-8
Chapter 6 IP Routing Policy Configuration
Command
filter-policy gateway ip-prefix-name
import
undo filter-policy
ip-prefix-name import
filter-policy { acl-number | ip-prefix
ip-prefix-name } [ gateway ] import
undo filter-policy
ip-prefix ip-prefix-name } [ gateway ]
import
Command
filter-policy { acl-number
ip-prefix-name } export [ routing-process ]
undo filter-policy { acl-number | ip-prefix
ip-prefix-name } export [ routing-process ]
gateway
{ acl-number |
| ip-prefix