Huawei Quidway S3500 Series Operation Manual page 185

Operation Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches
Table 3-15 Configuring RIP to filter the received routes
Configure filtering the received
routing information distributed by
the specified address
Cancel
routing information distributed by
the specified address
Configure filtering the received
global routing information
Cancel filtering the received global
routing information
II. Configuring filtering the route distributed by RIP
Table 3-16 Configuring RIP to filter the distributed routes
Configure RIP to filter the
distributed routing information
Cancel the RIP filtering of the
routing information
By default, RIP will not filter the received and distributed routing information.
Note:
The filter-policy import command filters the RIP routes received from its neighbors,
and the routes that cannot pass the filter won't be added to the routing table, and
won't be advertised to the neighbors.
The filter-policy export command filters all the advertised routes, including routes
imported by using the import-route command, and RIP routes learned from the
neighbors.
If the filter-policy export command does not specify which route to be filtered, then
all the routes imported by the import-route command and the transmitted RIP
routes will be filtered.
Operation
filtering the received
Operation
Huawei Technologies Proprietary
Command
filter-policy gateway ip-prefix-name import
undo filter-policy gateway ip-prefix-name
import
filter-policy {
ip-prefix-name [ gateway ip-prefix-name ] |
route-policy route-policy-name } import
undo filter-policy { acl-number | ip-prefix
ip-prefix-name [ gateway ip-prefix-name ] |
route-policy route-policy-name } import
Command
filter-policy { acl-number
ip-prefix-name | route-policy route-policy-name }
export [ routing-protocol ]
undo filter-policy { acl-number | ip-prefix
ip-prefix-name | route-policy route-policy-name }
export [ routing-protocol ]
3-10
Chapter 3 RIP Configuration
acl-number | ip-prefix
| ip-prefix