Operation Manual - STP
Quidway S3500 Series Ethernet Switches
II. Networking diagram
Switch C
Switch C
Switch C
Switch C
Switch A
Switch A
Switch A
Switch A
Figure 2-2 Network diagram for BPDU Tunnel configuration
III. Configuration procedures
1)
Configure Switch A
# Enable RSTP on the device.
[Quidway] stp enable
# Add port Ethernet 0/1 into VLAN 10.
[Quidway] vlan 10
[Quidway-Vlan10] port Ethernet 0/1
2)
Configure Switch B
# Enable RSTP on the device.
[Quidway] stp enable
# Add port Ethernet 0/1 into VLAN 10.
[Quidway] vlan 10
[Quidway-Vlan10] port Ethernet 0/1
3)
Configure Switch C
# Enable MSTP on the device.
[Quidway] stp enable
# Enable BPDU Tunnel on the device.
[Quidway] vlan-vpn tunnel
# Add port Ethernet0/1 into VLAN 10.
[Quidway] vlan 10
[Quidway-Vlan10] port Ethernet 0/1
# First disable the STP protocol and then enable VLAN VPN on Ethernet0/1.
E 0/2
E 0/2
E 0/1
E 0/1
E 0/1
E 0/1
E 0/1
E 0/1
Huawei Technologies Proprietary
2-3
Chapter 2 BPDU Tunnel Configuration
E 0/1
E 0/1
Switch D
Switch D
Switch D
Switch D
E 0/2
E 0/2
E 0/1
E 0/1
E 0/1
E 0/1
Switch B
Switch B
Switch B
Switch B