Set Gvrp Registration Type; Display And Debug Gvrp - Huawei Quidway S3500 Series Operation Manual

Operation Manual - VLAN
Quidway S3500 Series Ethernet Switches
Table 3-4 Enable/Disable port GVRP
Enable port GVRP
Disable port GVRP
GVRP should be enabled globally before it is enabled on the port. The GVRP can only
be enabled/disabled on Trunk port.
By default, port GVRP is disabled.

3.2.4 Set GVRP Registration Type

The GVRP registration types include Normal, Fixed and Forbidden (see IEEE 802.1Q).
When an Ethernet port is set to be in Normal registration mode, the dynamic and
manual creation, registration and logout of VLAN are allowed on this port.
When one Trunk port is set as fixed, the system will add the port to the VLAN if a
static VLAN is created on the switch and the Trunk port allows the VLAN passing.
GVRP will also add this VLAN item to the local GVRP database, one link table for
GVRP maintenance. However, GVRP cannot learn dynamic VLAN through this
port. The learned dynamic VLAN from other ports of the local switch will not be
able to send statements to outside through this port.
When an Ethernet port is set to be in Forbidden registration mode, all the VLANs
except VLAN1 will be logged out and no other VLANs can be created and
registered on this port.
Perform the following configurations in Ethernet port view.
Table 3-5 Set GVRP registration type
Set GVRP registration type
Restore
registration type
By default, GVRP registration type is normal.

3.2.5 Display and Debug GVRP

After the above configuration, execute display command in any view to display the
running of GVRP configuration, and to verify the effect of the configuration. Execute
debugging command in user view to debug the configuration of GVRP.
Operation
Operation
the default GVRP
Huawei Technologies Proprietary
Chapter 3 GARP/GVRP Configuration
gvrp
undo gvrp
Command
gvrp registration { normal | fixed | forbidden }
undo gvrp registration
3-5
Command