Configuring Networks For Bgp Distribution; Configuring The Interaction Between Bgp And Igp - Huawei Quidway S3500 Series Operation Manual

Operation Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches
By default, route filtering based on AS path list for a peer (group) is disabled.
IV. Configuring route filtering policy based on address prefix list for a peer
(group)
Table 5-20 Configuring route filtering policy based on address prefix list for a peer
(group)
Configure the route filtering policy
based on address prefix list for a peer
(group)
Remove the route filtering policy based
on address prefix list of a peer (group)
By default, route filtering based on address prefix list for a peer (group) is disabled.

5.2.5 Configuring Networks for BGP Distribution

Perform the following configurations in BGP view.
Table 5-21 Configuring Networks for BGP Distribution
Configure the local network
route
Remove the local network
route
By default, no network is configured for BGP distribution.

5.2.6 Configuring the Interaction between BGP and IGP

I. Importing IGP routes
BGP can transmit the internal network information of local AS to other AS. To reach
such objective, the network information about the internal system learned by the local
router via IGP routing protocol can be transmitted.
Perform the following configurations in BGP view.
Operation
Operation
Huawei Technologies Proprietary
peer { peer-address | group-name }
ip-prefix prefixname { import | export }
undo peer { peer-address | group-name }
ip-prefix prefixname { import | export }
Command
network ip-address address-mask [ route-policy
route-policy-name ]
undo network
[ route-policy route-policy-name ]
5-12
Chapter 5 BGP Configuration
Command
ip-address address-mask