Displaying And Debugging Aaa And Radius Protocol - Huawei Quidway S3500 Series Operation Manual

Operation Manual - Security
Quidway S3500 Series Ethernet Switches

3.4 Displaying and Debugging AAA and RADIUS Protocol

After the above configuration, execute display command in any view to display the
running of the AAA and RADIUS configuration, and to verify the effect of the
configuration. Execute reset command in user view to reset AAA and RADIUS
statistics, etc. Execute debugging command in user view to debug AAA and RADIUS.
Table 3-27 Displaying and debugging AAA and RADIUS protocol
Display
information of the specified or
all the ISP domains.
Display related information of
user's connection
Display related information of
the local user(S3526, S3526
FM and S3526 FS switches
don't support ssh parameter.)
Display the statistics of local
RADIUS authentication server
Display
information of all the RADIUS
schemes or a specified one
Display the statistics of RADIUS
packets
Display the stopping accounting
requests saved in buffer without
response (from system view)
Delete the stopping accounting
requests saved in buffer without
response (from system view)
Reset the statistics of RADIUS
server.
Enable
debugging
Disable
debugging
Enable
RADIUS authentication server
Operation
the configuration
the configuration
RADIUS packet
RADIUS packet
debugging of local
Huawei Technologies Proprietary
Chapter 3 AAA and RADIUS Protocol Configuration
Command
display domain [ isp-name ]
display connection [ access-type { dot1x |
portal } | domain isp-name | interface portnum |
|
ip ip-address
radius-scheme radius-scheme-name | vlan
vlanid | ucibindex ucib-index | user-name
user-name ]
display local-user [ domain isp-name | idle-cut
{ disable | enable } | service-type { telnet | ftp |
lan-access | ssh } | state { active | block } |
user-name user-name | vlan vlan-id]
display local-server statistics
display radius [ radius-scheme-name ]
display radius statistics
display
{
radius-scheme
session-id session-id | time-range start-time
stop-time | user-name user-name }
reset stop-accounting-buffer { radius-scheme
radius-scheme-name | session-id session-id |
time-range start-time stop-time | user-name
user-name }
reset radius statistics
debugging radius packet
undo debugging radius packet
debugging local-server { all | error | event
packet }
3-21
mac mac-address
stop-accounting-buffer
radius-scheme-name
|
|