Configuring Traffic Mirroring - Huawei Quidway S3500 Series Operation Manual

Operation Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches
Perform the following configuration in system view.
Table 2-24 Map configuration
Operation
Configure "COS
->Local-preced
ence" map
Restore
default value
By default, the switch uses the default mapping relationship.
II. Configuring the queue scheduler
You can use the following command to configure the queue scheduler.
Perform the following configuration in system view.
Table 2-25 Configuring the queue scheduling algorithm
Configure
scheduling algorithm
Restore
queue
algorithm
Ethernet Switch support 3 kinds of queue schedulers, i.e., strict-priority, WRR and
Delay bounded WRR.
By default, the switch uses the strict-priority algorithm.
For details about the command, refer to the Command Manual.

2.3.8 Configuring Traffic Mirroring

The function of Traffic mirroring is to copy the traffic matching ACL rule to the
designated observing port to analyze and monitor the packets.
You can use the following command to configure the traffic mirroring.
Perform the following configuration in system view.
qos cos-local-precedence-map
cos1-map-local-prec cos2-map-local-prec cos3-map-local-prec
cos4-map-local-prec cos5-map-local-prec cos6-map-local-prec
cos7-map-local-prec
its
undo qos cos-local-precedence-map
Operation
queue-scheduler { strict-priority | wrr queue1-weight
the queue queue2-weight
wrr-max-delay
queue3-weight queue4-weight maxdelay }
the default
scheduling undo queue-scheduler
Huawei Technologies Proprietary
Command
Command
queue3-weight
queue1-weight
2-17
Chapter 2 QoS Configuration
cos0-map-local-prec
queue4-weight
queue2-weight
|