Acl Configuration Example Of S3526; Advanced Acl Configuration Example - Huawei Quidway S3500 Series Operation Manual

Operation Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches
Display the configuration of flow
template
Clear ACL counters
The matched information of display acl config command specifies the rules treated by
the switch's CPU. The matched information of the transmitted data by switch can be
displayed by display qos-interface traffic-statistic command.
For syntax description, refer to the Command Manual.

1.5 ACL Configuration Example of S3526

1.5.1 Advanced ACL Configuration Example

I. Networking requirements
The interconnection between different departments on a company network is
implemented through the 100M ports of the Ethernet Switch. The payment query server
of the Financial Dept. is accessed via Ethernet1/1 (at 129.110.1.2). It is required to
properly configure the ACL and limit the department access the payment query server
between 8:00 and 18:00.
II. Networking diagram
Office of President
129.111.1.2
Financial Department
subnet address
10.110.0.0
Figure 1-2 Access control configuration example
III. Configuration procedure
Operation
Pay query server
129.110.1.2
#4
#3
#2
#1
Switch
Administration Department
subnet address
Connected to a router
10.120.0.0
Huawei Technologies Proprietary
Command
display flow-template [ default | interface
interface-type interface-num | user-defined ]
reset acl counter { all | acl-number | acl-name }
1-25
Chapter 1 ACL Configuration