Configuring Traffic Mirroring; Configuring Traffic Statistics - Huawei Quidway S3500 Series Operation Manual

Operation Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches
II. Configuring the queue scheduler
You can use the following command to configure the queue scheduler.
Perform the following configuration in Ethernet port view.
Table 2-10 Configuring the queue scheduling algorithm
Configure the queue scheduling
algorithm
Restore
scheduling algorithm
Ethernet Switch supports strict-priority and WRR queue schedulers.
By default, the switch uses the strict-priority algorithm.
For details about the command, refer to the Command Manual.

2.2.5 Configuring Traffic Mirroring

The function of Traffic mirroring is to copy the traffic matching ACL rule to the
designated observing port to analyze and monitor the packets.
You can use the following command to configure the traffic mirroring.
Perform the following configuration in system view.
Table 2-11 Configuring traffic mirroring
Operation
Configure
mirroring
Cancel
configuration
traffic mirroring
For details about the command, refer to the Command Manual.

2.2.6 Configuring Traffic Statistics

The traffic statistics function is used for counting the data packets of the specified traffic,
that is, this function counts the transmitted data which matches the ACL rules. After the
traffic statistics function is configured, the user can use display qos-global
traffic-statistic command to display the statistics information.
You can use the following command to configure traffic statistics.
Operation
the default queue
mirrored-to { ip-group { acl-number | acl-name } [ rule rule ] |
traffic
link-group { acl-number | acl-name } [ rule rule ] } interface
{ interface-name | interface-type interface-num }
the
undo mirrored-to { ip-group { acl-number | acl-name } [ rule
of
rule ] | link-group { acl-number | acl-name } [ rule rule ] }
Huawei Technologies Proprietary
Command
queue-scheduler
queue1-weight queue2-weight queue3-weight
queue4-weight }
undo queue-scheduler
Command
2-10
Chapter 2 QoS Configuration
{ strict-priority | wrr