Configure Snmp; Set Community Name; Set The Method Of Identifying And Contacting The Administrator - Huawei Quidway S3500 Series Operation Manual

Hide thumbs Also See for Quidway S3500 Series:
Table of Contents

Advertisement

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches

5.3 Configure SNMP

The main configuration of SNMP includes:

Set community name

Set the Method of Identifying and Contacting the Administrator

Enable/Disable snmp Agent to Send Trap
Set the Destination Address of Trap
Set sysLocation
Set the Engine ID of a Local or Remote Device
Set/Delete an SNMP Group
Set the Source Address of Trap
Add/Delete a User to/from an SNMP Group
Create/Update View Information or Deleting a View
Set the Size of SNMP Packet Sent/Received by an Agent
5.3.1 Set Community Name
SNMP V1 and SNMPV2C adopt the community name authentication scheme. The
SNMP message incompliant with the community name accepted by the device will be
discarded. SNMP Community is named with a character string, which is called
Community Name. The various communities can have read-only or read-write access
mode. The community with read-only authority can only query the device information,
whereas the community with read-write authority can also configure the device.
You can use the following commands to set the community name.
Perform the following configuration in system view.
Table 5-2 Set community name
Set the community name and
the access authority
Remove the community name
and the access authority
5.3.2 Set the Method of Identifying and Contacting the Administrator
The sysContact is a management viable of the system group in MIB II. The content is
the method of identifying and contacting the related personnel of the managed device.
You can use the following commands to set the method of identifying and contacting
the administrators.
Perform the following configuration in system view.
Operation
Huawei Technologies Proprietary
Command
snmp-agent community { read | write }
community-name [ [ mib-view view-name ] [ acl
acl-list ] ]
undo
snmp-agent
community-name
5-3
Chapter 5 SNMP Configuration
community

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents