Huawei Quidway S3500 Series Operation Manual page 569

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches
Caution:
If the flash memory of the switch is not enough, you need to first delete the existing
programs in the flash memory and then upload the new ones.
# Enter system view and download the switch.app from the TFTP server to the flash
memory of the switch.
<Quidway> system-view
[Quidway]
# Configure IP address 1.1.1.1 for the VLAN interface, ensure the port connecting the
PC is also in this VALN (VLAN 1 in this example).
[Quidway] interface vlan 1
[Quidway-vlan-interface1] ip address 1.1.1.1 255.255.255.0
[Quidway-vlan-interface1] quit
# Upload the vrpcfg.txt to the TFTP server.
[Quidway] tftp put vrpcfg.txt //1.1.1.2/vrpcfg.txt
# Download the switch.app from the TFTP server.
[Quidway] tftp get //1.1.1.2/switch.app switch.app
# Use the boot boot-loader command to specify the downloaded program as the
application at the next login and reboot the switch.
<Quidway> boot boot-loader switch.app
<Quidway> reboot
Huawei Technologies Proprietary
1-14
Chapter 1 File System Management