Disable Snmp Agent; Display And Debug Snmp - Huawei Quidway S3500 Series Operation Manual

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches
The agent can receive/send the SNMP packets of the sizes ranging from 484 to 17940,
measured in bytes. By default, the size of SNMP packet is 1500 bytes.

5.3.14 Disable SNMP Agent

To disable SNMP Agent, please Perform the following configuration in system view.
Table 5-15 Disable snmp agent
Disable snmp agent
If user disable NMP Agent, it will be enabled whatever snmp-agent command is
configured thereafter.

5.4 Display and Debug SNMP

After the above configuration, execute display command in any view to display the
running of the SNMP configuration, and to verify the effect of the configuration. Execute
debugging command in user view to debug SNMP configuration.
Table 5-16 Display and debug SNMP
Display the statistics information about
SNMP packets
Display the engine ID of the active device
Display the group name, the security
mode, the states for all types of views, and
the storage mode of each group of the
switch.
Display the names of all users in the group
user table
Display the current community name
Display the current MIB view
Display the contact character string of the
system
Display the location character string of the
system
Operation
Operation
Huawei Technologies Proprietary
Command
undo snmp-agent
display snmp-agent statistics
display
{ local-engineid | remote-engineid }
display
[ group-name ]
display
[ engineid
groupname ] [ username username ]
display
[ read | write ]
display
[ exclude | include | { viewname
mib-view } ]
display
contact
display
location
5-8
Chapter 5 SNMP Configuration
Command
snmp-agent
snmp-agent group
snmp-agent usm-user
engineid ] [ group
snmp-agent community
snmp-agent mib-view
snmp-agent sys-info
snmp-agent sys-info