Huawei Quidway S3500 Series Operation Manual page 465

Operation Manual - STP
Quidway S3500 Series Ethernet Switches
Operation
Enable
snooping on the
interface
Quit
interface view
Enable
snooping globally
Display
configuration
information
Note:
You must enable digest snooping on an interface first before enabling it globally.
Digest snooping is unnecessay if the interconnected switches are from the same
vendor.
To enable digest snooping, the interconneted switches must be configured with the
same settings.
To enable digest snooping, all interfaces in a MSTP domain used to connect other
switches must have digest snooping enabled.
Do not enable digest snooping on border interfaces of an MSTP domain.
To change domain configuration, be sure to disable digest snooping first to prevent
broadcast storm.
Command
digest
stp
config-digest-snooping
Ethernet
quit
digest stp
config-digest-snooping
current
display
current-configuration
Huawei Technologies Proprietary
Required. Digest snooping is
disabled by default
—
Required. Digest snooping is
disabled by default
This
executed in any view
3-2
Chapter 3 Digest Snooping
Remark
command can be