Huawei Quidway S3500 Series Operation Manual page 584

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches
The sysname is the host name, the default value is "Quidway".
User can change the host name through sysname command.
Notice: There is a blank between sysname and module name.
4) Module name
The module name is the name of module which create this logging information, the
following sheet list some examples:
Table 4-10 Module names in logging information
BGP
CFM
HWCM
IFNET
IP
NTP
OSPF
SNMP
Notice: There is a slash ('/') between module name and severity.
5) Severity
Switch information falls into three categories: log information, debugging information
and trap information. The info-center classifies every kind of information into 8 severity
or urgent levels. The log filtering rule is that the system prohibits outputting the
information whose severity level is greater than the set threshold. The more urgent the
logging packet is, the smaller its severity level is. The level represented by
"emergencies" is 1, and that represented by "debugging" is 8. Therefore, when the
threshold of the severity level is "debugging", the system will output all the information.
Definition of severity in logging information is as followed.
Table 4-11 Info-center-defined severity
emergencies
alerts
critical
errors
warnings
Module name
Severity
The extremely emergent errors
The errors that need to be corrected immediately.
Critical errors
The errors that need to be concerned but not critical
Warning, there might exist some kinds of errors.
Huawei Technologies Proprietary
Chapter 4 System Maintenance and Debugging
Description
Border Gateway Protocol
Configuration File Management
Huawei Configuration Mib
Interface Management
Internet Protocol
Network Time Protocol
Open Shortest Path First
Simple Network Management Protocol
Description
4-7