Huawei Quidway S3500 Series Operation Manual page 314

Operation Manual - Multicast
Quidway S3500 Series Ethernet Switches
[Quidway] interface vlan-interface 40
[Quidway-vlan-interface40] ip address 6.6.6.6 255.255.0.0
[Quidway-vlan-interface40] pim sm
[Quidway-vlan-interface40] quit
# Configure the C-BSR.
[Quidway] pim
[Quidway-pim] c-bsr vlan-interface 20 30 2
# Configure the C-RP.
[Quidway] acl number 2000
[Quidway-acl-basic-2000] rule permit source 225.0.0.0 0.255.255.255
[Quidway] pim
[Quidway-pim] c-rp vlan-interface 20 group-policy 2000
[Quidway-pim] quit
# Configure PIM domain boundary.
[Quidway] interface vlan-interface 40
[Quidway-vlan-interface40] pim bsr-boundary
After VLAN-interface 40 is configured as PIM domain boundary, the LSWD will be
excluded from the local PIM domain and cannot receive the BSR information
transmitted from LSWB any more.
3) Configure LSWC.
# Enable PIM-SM.
[Quidway] multicast routing-enable
[Quidway] vlan 10
[Quidway-vlan10] port ethernet 0/2
[Quidway-vlan10] quit
[Quidway] interface vlan-interface 10
[Quidway-vlan-interface10] ip address 7.7.7.7 255.255.0.0
[Quidway-vlan-interface10] igmp enable
[Quidway-vlan-interface10] pim sm
[Quidway-vlan-interface10] quit
[Quidway] vlan 12
[Quidway-vlan12] port ethernet 0/3
[Quidway-vlan12] quit
[Quidway] interface vlan-interface 12
Huawei Technologies Proprietary
7-11
Chapter 7 PIM-SM Configuration