Huawei Quidway S3500 Series Operation Manual page 312

Operation Manual - Multicast
Quidway S3500 Series Ethernet Switches
LSWA connects to LSWB through the interface vlan-interface20, connects the
HostA through vlan-interface11, and connects to LSWC through vlan-interface12.
LSWB connects to LSWA through the interface vlan-interface20, connects the
HostC through vlan-interface30, and connects to LSWD through vlan-interface40.
LSWC connects to LSWB through the interface vlan-interface10, connects the
HostB through vlan-interface30, and connects to LSWA through vlan-interface12.
HostA is the receiver in a multicast group (IP address of the group is 225.0.0.1). HostB
transmits the data destined for 225.0.0.1 and the LSWA receives the multicast data
from HostB via LSWB.
II. Networking diagram
HostA HostA
VLAN11 VLAN11
LSWA LSWA
Figure 7-2 PIM-SM configuration networking
III. Configuration procedure
1) Configure LSWA
# Enable PIM-SM.
[Quidway] multicast routing-enable
[Quidway] vlan 11
[Quidway-vlan11] port ethernet 0/2
[Quidway-vlan11] quit
[Quidway] interface vlan-interface 11
[Quidway-vlan-interface11] ip address 2.2.2.2 255.255.0.0.
[Quidway-vlan-interface11] igmp enable
[Quidway-vlan-interface11] pim sm
[Quidway-vlan-interface11] quit
HostB HostB
VLAN12 VLAN12 VLAN12 VLAN12
VLAN30 VLAN30
VLAN20 VLAN20
VLAN20 VLAN20 VLAN30 VLAN30
LSWB LSWB
VLAN40 VLAN40
LSWD LSWD
Huawei Technologies Proprietary
7-9
Chapter 7 PIM-SM Configuration
VLAN10 VLAN10
LSWC LSWC