Chapter 3 Device Management; Device Management Overview; Device Management Configuration; Reboot Ethernet Switch - Huawei Quidway S3500 Series Operation Manual

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches

Chapter 3 Device management

3.1 Device Management Overview

With the device management function, the Ethernet Switch can display the current
running state and event debugging information about the slots, thereby implementing
the maintenance and management of the state and communication of the physical
devices. In addition, there is a command available for rebooting the system, when
some function failure occurs.
The device management configuration task is simple. As far as a user concerned, it is
mainly the display and debug the device management.

3.2 Device Management Configuration

The device management configuration includes:

Reboot Ethernet switch

Designate the APP adopted when booting the Ethernet switch next time

Upgrade BootROM
3.2.1 Reboot Ethernet Switch
It would be necessary for users to reboot the Ethernet switch when failure occurs.
Perform the following configuration in user view.
Table 3-1 Reboot Ethernet switch
Reboot the whole system
3.2.2 Designate the APP Adopted When Booting the Ethernet Switch Next
Time
In the case that there are several APPs in the Flash Memory, you can use this
command to designate the APP adopted when booting the Ethernet switch next time.
Perform the following configuration in user view.
Table 3-2 Designate the APP adopted when booting the Ethernet switch next time
Designate the APP adopted when
booting the Ethernet switch next time
Operation
Operation
Huawei Technologies Proprietary
Command
reboot
boot boot-loader file-url
3-1
Chapter 3 Device management
Command