Huawei Quidway S3500 Series Operation Manual page 506

Operation Manual - Security
Quidway S3500 Series Ethernet Switches
I. Setting the password display mode
Perform the following configurations in system view.
Table 3-4 Setting the method that a local user uses to display password
Set the mode that a local user
uses to display password
Cancel the mode that the local
user uses to display password
Where, auto means that the password display mode will be the one specified by the
user at the time of configuring password (see the password command in the following
table for reference), and cipher-force means that the password display mode of all the
accessing users must be in cipher text.
II. Setting the attributes of local users
Perform the following configurations in local user view.
Table 3-5 Setting/Removing the attributes concerned with a specified user
Set a
specified user
Remove the password set
for the specified user
Set the state of the specified
user
Set a service type for the
specified user (For S3552G,
S3552P, S3528G, S3528P,
S3526E,
S3526E FS and S3526C)
Cancel the service type of
the specified
S3552G, S3552P, S3528G,
S3528P, S3526E, S3526E
FM,
S3526C)
Set a service type for the
specified user (For S3526,
S3526 FM and S3526 FS)
Operation
Operation
password for a
S3526E FM,
user (For
S3526E FS and
Huawei Technologies Proprietary
Chapter 3 AAA and RADIUS Protocol Configuration
local-user
{ cipher-force | auto }
undo local-user password-display-mode
Command
password { simple | cipher } password
undo password
state { active | block }
service-type { ftp [ ftp-directory directory ] |
lan-access | { ssh | telnet }* [ level level ] }
undo service-type { ftp [ ftp-directory ] |
lan-access | { ssh | telnet }* [ level level ] }
service-type { ftp [ ftp-directory directory ] |
lan-access | telnet [ level level ] }
3-6
Command
password-display-mode