Name The Current Vlan - Huawei Quidway S3500 Series Operation Manual

Operation Manual - VLAN
Quidway S3500 Series Ethernet Switches
Note that you can add/delete trunk port and hybrid port to/from VLAN by port and undo
port commands in Ethernet port view, but not in VLAN view.
1.2.4 Set/Delete VLAN or VLAN interface Description Character String
You can use the following command to set/delete VLAN or VLAN interface description
character string.
Perform the following configuration in VLAN or VLAN interface view.
Table 1-4 Set/Delete VLAN or VLAN interface description character string
Set the description character string for VLAN or
VLAN interface
Restore the default description of current VLAN
or VLAN interface
By default, VLAN description character string is VLAN ID of the VLAN, e.g. VLAN 0001.
VLAN interface description character string is the VLAN interface name, e.g.
Vlan-interface1 Interface.

1.2.5 Name the current VLAN

You can use the following command to name the current VLAN.
Perform the following configuration in VLAN view.
Table 1-5 Name the current VLAN
Name the current VLAN
Restore the default name of the current VLAN
By default, the name is the VLAN ID of the current VLAN, e.g. VLAN 0001.
Note that:
FS/S3526C support the command.
1.2.6 Specify/Remove VLAN Interface
You can use the following command to specify/remove the VLAN interface.
Operation
Operation
S3552F/S3552G/S3552P/3528G/3528P/S3526E/S3526E
Huawei Technologies Proprietary
1-3
Chapter 1 VLAN Configuration
Command
description string
undo description
Command
name
undo name
FM/S3526E