Huawei Quidway S3500 Series Operation Manual page 227

Operation Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches
Table 5-11 Configuring itself as the next hop in advertising route
Configure itself as the next hop in advertising
route
Disable the specification of itself as the next
hop in advertising route
By default, local router does not specify itself as the next hop while advertising route to
a peer (group).
V. Removing private AS numbers while transmitting BGP update messages
Generally, the AS numbers (public AS numbers or private AS numbers) are included in
the AS paths while transmitting BGP update messages. This command is used to
configure certain outbound routers to ignore the private AS numbers while transmitting
update messages.
Table 5-12 Removing private AS numbers while transmitting BGP update messages
Remove
transmitting BGP update messages
Include
transmitting BGP update messages
By default, the private AS numbers are included while transmitting BGP update
messages.
VI. Configuring to send the community attributes to a peer or peer group
Table 5-13 Configuring to send the community attributes to a peer or peer group
Configure to send the community
attributes to a peer or peer group
Configure not to send the community
attributes to a peer or peer group
VII. Configuring the repeating time of local AS
Using peer allow-as-loop command, the repeating time of local AS can be configured.
Perform the following configurations in BGP view.
Operation
Operation
private AS numbers
private AS numbers
Operation
Huawei Technologies Proprietary
peer { peer-address | group-name }
next-hop-local
undo peer
group-name } next-hop-local
while peer { peer-address | group-name }
public-as-only
while undo peer
group-name } public-as-only
peer { group-name | peer-address }
advertise-community
undo peer
peer-address } advertise-community
5-9
Chapter 5 BGP Configuration
Command
{ peer-address
Command
{ peer-address
Command
{ group-name
|
|
|