Huawei Quidway S3500 Series Operation Manual page 321

Operation Manual - Multicast
Quidway S3500 Series Ethernet Switches
II. Network diagram
Workstation Workstation Workstation
Figure 9-1 Network diagram for multicast VLAN
III. Configuration procedure
This procedure supposes that the IP addresses have been configured and the devices
are properly connected.
1) Configure switch A as follows:
# Configure the IP address of the VLAN 20 interface to 168.10.1.1 and enable the PIM
DM protocol.
<Switch A> system-view
[Switch A] multicast routing-enable
[Switch A] vlan 20
[Switch A-vlan20] interface vlan-interface 20
[Switch A-Vlan-interface20] ip address 168.10.1.1 255.255.255.0
[Switch A-Vlan-interface20] pim dm
[Switch A-Vlan-interface20] quit
# Configure VLAN 10.
[Switch A] vlan 10
[Switch A-vlan10] quit
# Define the type of the Ethernet 1/0/10 port to hybrid. Then join the port to VLAN 2, 3
and 10 with the tagged option for the port to carry VLAN tag when transmitting packets
of these VLANs.
[Switch A] interface Ethernet 1/0/10
[Switch A-Ethernet 1/0/10] port link-type hybrid
Switch A Switch A
Switch B Switch B
Huawei Technologies Proprietary
9-4
Chapter 9 Multicast VLAN
PC 1 PC 1 PC 1 PC 1 PC 1 PC 1 PC 1 PC 1
PC 2 PC 2 PC 2 PC 2 PC 2 PC 2 PC 2 PC 2