Sending The Configuration Information To Log Buffer - Huawei Quidway S3500 Series Operation Manual

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches
Table 4-33 Enabling terminal display function
Enable terminal display function of log, debugging and
trap information
Disable terminal display function of the above information
Enable terminal display function of debugging information
Disable terminal display function of debugging information
Enable terminal display function of log information
Disable terminal display function of log information
Enable terminal display function of trap information
Disable terminal display function of trap information

4.5.6 Sending the Configuration Information to Log Buffer

To send configuration information to log buffer, follow the steps below:
1) Enabling info-center
Perform the following operation in system view.
Table 4-34 Enabling/disabling info-center
Enable info-center
Disable info-center
Note:
Info-center is enabled by default. After info-center is enabled, system performances are
affected when the system processes much information because of information
classification and outputting.
2) Configuring to output information to log buffer
Perform the following operation in system view.
Operation
Operation
Huawei Technologies Proprietary
4-20
Chapter 4 System Maintenance and Debugging
terminal monitor
undo
monitor
terminal debugging
undo
debugging
terminal logging
undo
logging
terminal trapping
undo
trapping
Command
info-center enable
undo info-center enable
Command
terminal
terminal
terminal
terminal