Enabling Ospf And Enter Ospf View; Entering Ospf Area View - Huawei Quidway S3500 Series Operation Manual

Operation Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches
Configuring NSSA of OSPF
Configuring the Route Summarization of OSPF Area
Configuring OSPF Area Route Summary
Configuring OSPF Virtual Link
Configuring Summarization of Imported Routes by OSPF
Configuring the OSPF Area to Support Packet Authentication
Configuring OSPF Packet Authentication
Configuring OSPF to import Routes of Other Protocols
Configuring Parameters for OSPF to Import External Routes
Configuring OSPF to Import the Default Route
Setting OSPF Route Preference
Configuring OSPF Route Filtering
Configuring to Fill the MTU Field When an Interface Transmits DD Packets
Disabling the Interface to Send OSPF Packets
Configuring OSPF and Network Management System
Resetting the OSPF Process

4.2.1 Enabling OSPF and Enter OSPF View

Perform the following configurations in system view.
Table 4-1 Enabling OSPF process
Enable OSPF process
Disable the OSPF process
By default, OSPF is not enabled.

4.2.2 Entering OSPF Area view

Perform the following configurations in OSPF view.
Table 4-2 Entering OSPF Area view
Enter OSPF Area view
delete a designated OSPF area
area-id: ID of the OSPF area, which can be a decimal integer or in IP address format.
Operation
Operation
Huawei Technologies Proprietary
4-5
Chapter 4 OSPF Configuration
Command
ospf
undo ospf
Command
area area-id
undo area area-id