Displaying And Debugging System-Guard - Huawei Quidway S3500 Series Operation Manual

Operation Manual - Security
Quidway S3500 Series Ethernet Switches
Table 6-4 Enabling the switch not to learn the destination address
Enable the switch not to learn the
destination address in the packets
Enable
destination address in the packets

6.3 Displaying and Debugging System-guard

After the above configuration, execute display command in any view to display the
running of system-guard configuration, and to verify the effect of the configuration.
Table 6-5 Displaying and debugging system-guard
Display the IP packets that the switch CPU
receives during this detection interval
Display
parameters of system-guard
Operation
the switch to learn
Operation
current detection
Huawei Technologies Proprietary
Chapter 6 System-guard Configuration
system-guard no-learn-dip enable
the
undo system-guard
enable
display system-guard ip-record
results and
display system-guard state
6-4
Command
no-learn-dip
Command