Table of Contents
Advertisement
Operation Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches
The matched information of display acl config command specifies the rules treated by
the switch's CPU. The matched information of the transmitted data by switch can be
displayed by display qos-global traffic-statistic command.
For syntax description, refer to the Command Manual.
1.3 Configuring ACL of S3526E and S3526C
ACL configuration includes:
Configuring the time range
Defining ACL
Activating ACL
The above three steps had better be taken in sequence. Configure time range first and
then define ACL (using the defined time range in the definition), followed activating ACL
to validate it.
1.3.1 Configuring the Time-Range
The process of configuring a time-range includes the steps of configuring the
hour-minute range, date ranges and period range. The hour-minute range is expressed
in the units of minute, hour. Date range is expressed in the units of minute, hour, date,
month and year. The periodic time range is expressed in the day of the week.
You can use the following command to set the time range by performing the following
configuration in the system view.
Table 1-11 Setting the absolute time range
Operation
Set
absolute
range
Delete
absolute
range
When the start-time and end-time are not configured, it will be all the time for one day.
The end time shall be later than the start time.
When end-time end-date is not configured, it will be all the time from now to the date
which can be displayed by the system. The end time shall be later than the start time.
1.3.2 Defining ACL
Huawei Switches support several kinds of ACLs. Here we will introduce how to define
these ACLs.
the
time-range time-name { start-time to end-time days-of-the-week
time
[ from start-time start-date ] [ to end-time end-date ] | from
start-time start-date [ to end-time end-date ] }
the
undo
time-range
time
days-of-the-week [ from start-time start-date ] [ to end-time
end-date ] | from start-time start-date [ to end-time end-date ] ]
Huawei Technologies Proprietary
Command
time-name
[
1-11
Chapter 1 ACL Configuration
start-time
to
end-time
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
