Setting Retransmission Times Of Radius Request Packet - Huawei Quidway S3000-EI Series Operation Manual

Operation Manual - Security
Quidway S3000-EI Series Ethernet Switches
Table 2-13 Setting RADIUS packet encryption key
Set RADIUS authentication/authorization packet
encryption key
Restore
authentication/authorization packet encryption key.
Set RADIUS accounting packet key
Restore the defa
By default,
a re all "huawei".
2.3.4 Setting Response Ti
A fter RADIUS (authentication/a
tr ansmitted for a period of time, if NAS has not r
s erver, it has to retransmit the request to guaran ee RADIUS service for the us
Y ou can use the following command to set respon
P erform the following configurations in RADIUS
T able 2-14 Setting response timeout timer of RADIUS server
Set response timeout timer of RADIUS server
Restore the response timeout timer of RADIUS
default value
B y default, timeout timer of RADIUS server is 3 seconds.
2.3.5 Sett ing Retransmission Times of RADIUS Request Packet
Since RADIUS protocol uses UDP packet to carry the data, the communication process
is not reliable. If the RADIUS server has not responded NAS before timeout, NAS has
to retransmit RADIUS request packet. If it transmits more than the specified retry-times,
NAS considers the communication with the primary and secondary RADIUS servers
has been disconnecte
You can use the following command to set retransmission times of RADIUS request
packet.
Perform the following configurations in RADIUS scheme view.
Operation
the default
ult RADIUS accounting packet key
the keys of RADIUS authentication/authorization and accounting p
meout Timer of RADIUS Server
uthorization or a
Operation
d.
Huawei Technologies Proprietary
Chapter 2 AAA and RADIUS Protocol
RADIUS
ccounting) reque
eceived the response from RADIUS
t
se timeout timer of RADIUS server
s cheme view.
server to
2-13
Configuration
Command
key authentication string
undo key authentication
key accounting string
und o key accou nting
st packet has been
er.
Command
timer seconds
undo timer
ackets
.