Huawei Quidway S3500 Series Operation Manual page 564

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches
III. Configuration procedure
1) Configure FTP server parameters on the PC: a user named as switch, password
hello, read & write authority over the Switch directory on the PC.
2) Configure the switch
# Log into the switch (locally through the Console port or remotely using Telnet).
<Quidway>
Caution:
If the flash memory of the switch is not enough, you need to first delete the existing
programs in the flash memory and then upload the new ones.
# Type in the right command in user view to establish FTP connection, then correct
username and password to log into the FTP server.
<Quidway> ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:*****
230 Logged in successfully
[ftp]
# Type in the authorized directory of the FTP server.
[ftp] cd switch
# Use the put command to upload the vrpcfg.txt to the FTP server.
[ftp] put vrpcfg.txt
# Use the get command to download the switch.app from the FTP server to the flash
directory on the FTP server.
[ftp] get switch.app
# Use the quit command to release FTP connection and return to user view.
[ftp] quit
<Quidway>
# Use the boot boot-loader command to specify the downloaded program as the
application at the next login and reboot the switch.
Huawei Technologies Proprietary
1-9
Chapter 1 File System Management