Enable/Disable Ftp Server; Configure The Ftp Server Authentication And Authorization - Huawei Quidway S3500 Series Operation Manual

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches
Table 1-9 Configuration of the switch as FTP server
Device
Switch
PC
Caution:
The prerequisite for normal FTP function is that the switch and PC are reachable.

1.3.2 Enable/Disable FTP Server

You can use the following commands to enable/disable the FTP server on the switch.
Perform the following configuration in system view.
Table 1-10 Enable/Disable FTP Server
Enable the FTP server
Disable the FTP server
FTP server supports multiple users to access at the same time. A remote FTP client
sends request to the FTP server. Then, the FTP server will carry out the corresponding
operation and return the result to the client.
By default, FTP server is disabled.

1.3.3 Configure the FTP Server Authentication and Authorization

You can use the following commands to configure FTP server authentication and
authorization. The authorization information of FTP server includes the top working
directory provided for FTP clients.
Configuration
Start FTP server.
Configure
authentication and
authorization for FTP
server.
Configure running
parameters for FTP
server.
Log into the switch
from FTP client.
Operation
Huawei Technologies Proprietary
Chapter 1 File System Management
Default
You can view the configuration
FTP server is
information of FTP server with
disabled.
the ftp-server command.
Configure username, password
-- and authorized directory for
FTP users.
Configure timeout time value for
FTP server.
-- --
Command
ftp server enable
undo ftp server
1-6
Description