Chapter 4 System Maintenance And Debugging; Basic System Configuration; Set Name For Switch; Set The System Clock - Huawei Quidway S3500 Series Operation Manual

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches

Chapter 4 System Maintenance and Debugging

4.1 Basic System Configuration

4.1.1 Set Name for Switch

Perform the operation of sysname command in the system view.
Table 4-1 set name for Switch
Set the switch name
Restore switch name to default value

4.1.2 Set the System Clock

Perform the operation of clock datetime command in the user view.
Table 4-2 Set the system clock
Set the system clock

4.1.3 Set the Time Zone

You can configure the name of the local time zone and the time difference between the
local time and the standard Universal Time Coordinated (UTC).
Perform the following operations in the user view.
Table 4-3 Setting the time zone
Operation
Set the local time
Restore to the default
UTC time zone
By default, the UTC time zone is adopted.
Operation
Operation
clock datetime HH:MM:SS YYYY/MM/DD
clock timezone zone_name { add | minus } HH:MM:SS
undo clock timezone
Huawei Technologies Proprietary
Chapter 4 System Maintenance and Debugging
sysname sysname
undo sysname
Command
Command
4-1
Command