Info-Center Configuration - Huawei Quidway S3500 Series Operation Manual

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches
notifications
informational
debugging
Notice: There is a slash between severity and digest.
6) Digest
The digest is abbreviation, it represent the abstract of contents.
Notice: There is a colon between digest and content.
7) Content
It is the contents of logging information.

4.5.2 Info-center Configuration

Switch supports 6 output directions of information.
The system assigns a channel in each output direction by default. See the table below.
Table 4-12 Numbers and names of the channels for log output
Output direction
Console
Monitor
Info-center loghost
Trap buffer
Logging buffer
snmp
Note:
The settings in the six directions are independent from each other. The settings will
take effect only after enabling the information center.
The info-center of Ethernet Switch has the following features:
Support to output log in six directions, i.e., Console, monitor to Telnet terminal,
logbuffer, loghost, trapbuffer, and SNMP.
The log is divided into 8 levels according to the significance and it can be filtered
based on the levels.
Severity
The information should be concerned.
Common prompting information
Debugging information
0
1
2
3
4
5
Huawei Technologies Proprietary
Chapter 4 System Maintenance and Debugging
Description
Channel number
4-8
Default channel name
console
monitor
loghost
trapbuffer
logbuffer
snmpagent