Displaying And Debugging Acl - Huawei Quidway S3500 Series Operation Manual

Operation Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches
Table 1-27 Activating ACL
Activate an ACL
Deactivate an ACL
Only the rules including these elements defined in template can be sent to target
hardware and referenced for such QoS functions as packet filtering, traffic policing,
priority re-labeling. Otherwise, the rules cannot be activated on the hardware. The ACL
combined mode is following.
Table 1-28 Combined Mode of ACL
Combined Mode
All rules in IP ACL
Only one rule in IP ACL
All rules in Link ACL
Only one rule in Link ACL
All rules in IP ACL and
one rule in Link ACL
One rule in IP ACL and
one rule in Link ACL
One rule in IP ACL and
all rules in Link ACL

1.4.5 Displaying and Debugging ACL

After the above configuration, execute display command in any view to display the
running of the ACL configuration, and to verify the effect of the configuration. Execute
reset command in user view to clear the statistics of the ACL module.
Table 1-29 Displaying and debugging ACL
Display the status of the time
range
Display the detail information
about the ACL
Display the information about
the ACL running state
Operation
ip-group { acl-number | acl-name }
ip-group { acl-number | acl-name } rule rule
link-group { acl-number | acl-name }
link-group { acl-number | acl-name } rule rule
ip-group { acl-number | acl-name } link-group
{ acl-number | acl-name } rule rule
ip-group { acl-number | acl-name } rule rule link-group
{ acl-number | acl-name } rule rule
ip-group { acl-number | acl-name } rule rule link-group
{ acl-number | acl-name }
Operation
Huawei Technologies Proprietary
packet-filter inbound acl-rule
undo packet-filter inbound acl-rule
Value
Command
display time-range { all | name }
display acl config { all | acl-number | acl-name }
display acl running-packet-filter all
1-24
Chapter 1 ACL Configuration
Command