Displaying Characteristics Of Command Line - Huawei Quidway S3500 Series Operation Manual

Hide thumbs Also See for Quidway S3500 Series:
Table of Contents

Advertisement

Operation Manual - Getting Started
Quidway S3500 Series Ethernet Switches

3.3.2 Displaying Characteristics of Command Line

Command line interface provides the following display characteristics:
For users' convenience, the instruction and help information can be displayed in
both English and Chinese.
For the information to be displayed exceeding one screen, pausing function is
provided. In this case, users can have three choices, as shown in the table below.
Table 3-2 Functions of displaying
Press <Ctrl+C> when the display pauses
Enter a space when the display pauses
Press <Enter> when the display pauses
3.3.3 History Command of Command Line
Command line interface provides the function similar to that of DosKey. The commands
entered by users can be automatically saved by the command line interface and you
can invoke and execute them at any time later. History command buffer is defaulted as
10. That is, the command line interface can store 10 history commands for each user.
The operations are shown in the table below.
Table 3-3 Retrieving history command
Operation
Display
command
Retrieve
previous
command
Retrieve
history command
Note:
Cursor keys can be used to retrieve the history commands in Windows 3.X Terminal
and Telnet. However, in Windows 9X HyperTerminal, the cursor keys ↑ and ↓ do not
work, because Windows 9X HyperTerminal defines the two keys differently. In this case,
use the combination keys <Ctrl+P> and <Ctrl+N> instead for the same purpose.
Key or Command
history
display
history-command
the
Up cursor key <↑> or
history
<Ctrl+P>
the
next
Down cursor key <↓>
or <Ctrl+N>
Huawei Technologies Proprietary
Chapter 3 Command Line Interface
Stop
displaying
command.
Continue to display the next screen of
information.
Continue to display the next line of
information.
Key
Display history command by user
inputting
Retrieve the previous history
command, if there is any.
Retrieve
command, if there is any.
3-8
Function
and
executing
Result
the
next
history

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents