Huawei Quidway S3500 Series Operation Manual page 20

Operation Manual - Getting Started
Quidway S3500 Series Ethernet Switches
Step 4: Dial for connection to the switch, using the terminal emulator and Modem on the
remote end. The number dialed shall be the telephone number of the Modem
connected to the switch. See the two figures below.
Figure 2-9 Setting the dialed number
Figure 2-10 Dialing on the remote PC
Step 5: Enter the preset login password on the remote terminal emulator and wait for
the prompt such as <Quidway>. Then you can configure and manage the switch. Enter
"?" to get the immediate help. For details of specific commands, refer to the following
chapters.
Note:
By default, when a Modem user logs in, he can access the commands at Level 0.
Huawei Technologies Proprietary
2-7
Chapter 2 Logging in Switch