Configuring Traffic Statistics; Displaying And Debugging Qos - Huawei Quidway S3500 Series Operation Manual

Operation Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches
Table 2-26 Configuring traffic mirroring
Operation
Configure
mirroring
Cancel
configuration
traffic mirroring
For details about the command, refer to the Command Manual.

2.3.9 Configuring Traffic Statistics

The traffic statistics function is used for counting the data packets of the specified traffic,
that is, this function counts the transmitted data which matches the ACL rules. After the
traffic statistics function is configured, the user can use display qos-global
traffic-statistic command to display the statistics information.
You can use the following command to configure traffic statistics.
Perform the following configuration in system view.
Table 2-27 Configuring traffic statistics
Operation
Configure
statistics
Cancel
configuration
traffic statistics
Display
statistics
information
For details about the command, refer to the Command Manual.

2.3.10 Displaying and Debugging QoS

After the above configuration, execute display command in any view to display the
running of the QoS configuration, and to verify the effect of the configuration. Execute
reset command in user view to clear the statistics of QoS module.
mirrored-to { user-group acl-number | acl-name [ rule rule ] |
traffic { ip-group { acl-number | acl-name } [ rule rule ] | link-group
{ acl-number | acl-name } [ rule rule ] }* } interface
{ interface-name | interface-type interface-num }
the undo mirrored-to { user-group acl-number | acl-name [ rule
of rule ] | { ip-group { acl-number | acl-name } [ rule rule ] |
link-group { acl-number | acl-name } [ rule rule ] }* }
traffic-statistic { user-group { acl-number | acl-name }
traffic
[ rule rule ] | { ip-group { acl-number | acl-name } [ rule rule ]
| link-group { acl-number | acl-name } [ rule rule ] }* }
undo traffic-statistic { user-group { acl-number |
the
acl-name } [ rule rule ] | { ip-group { acl-number | acl-name }
of
[ rule rule ] | link-group { acl-number | acl-name } [ rule
rule ] }* }
the
display qos-global traffic-statistic
Huawei Technologies Proprietary
2-18
Chapter 2 QoS Configuration
Command
Command