Multicast Mac Address Configuration Example - Huawei Quidway S3500 Series Operation Manual

Operation Manual - Multicast
Quidway S3500 Series Ethernet Switches
After you manually add a multicast MAC address, the switch cannot learn it using
IGMP snooping. The command can only remove the multicast MAC address
entries manually added, but not those learned by the switch.
To add a port to the multicast MAC address entry which is manually added, you
need first delete the entry and create it again, and then add the specified port as
the forwarding port of the entry.

8.3 Multicast MAC Address Configuration Example

I. Network requirements
Create a multicast MAC address entry on the switch:
multicast address: 0100-5e0a-0805
forwarding port: Ethernet 1/0/1
VLAN: VLAN1
II. Configuration procedure
<Quidway> system-view
[Quidway] mac-address multicast 0100-5e0a-0805 interface Ethernet 1/0/1 vlan 1
Chapter 8 Multicast MAC Address Configuration
Huawei Technologies Proprietary
8-2