Huawei Quidway S3500 Series Operation Manual page 82

Operation Manual - VLAN
Quidway S3500 Series Ethernet Switches
switches and dynamically update the local VLAN registration information including the
active members and through which port those members can be reached. All the
GVRP-supporting switches can propagate their local VLAN registration information to
other switches so that the VLAN information can be consistent on all GVRP-supporting
devices in one switching network. The VLAN registration information propagated by
GVRP includes both the local static registration information configured manually and
the dynamic registration information from other switches.
GVRP is described in details in the IEEE 802.1Q standard. Quidway Series Ethernet
Switches fully support the GARP compliant with the IEEE standards.
Main GVRP configuration includes:
Enable/Disable global GVRP
Enable/Disable port GVRP
Set GVRP registration type
In the above-mentioned configuration tasks, GVRP should be enabled globally before it
is enabled on the port. Configuration of GVRP registration type can only take effect
after the port GVRP is enabled. Besides, GVRP must be configured on the Trunk port.
3.2.2 Enable/Disable Global GVRP
You can use the following command to enable/disable global GVRP.
Perform the following configurations in system view.
Table 3-3 Enable/Disable global GVRP
Enable global GVRP
Disable global GVRP
By default, global GVRP is disabled.
3.2.3 Enable/Disable Port GVRP
You can use the following command to enable/disable the GVRP on a port.
Perform the following configurations in Ethernet port view.
Operation
Huawei Technologies Proprietary
3-4
Chapter 3 GARP/GVRP Configuration
Command
gvrp
undo gvrp