Configure Netbios Server Addresses For Dhcp Clients - Huawei Quidway S3500 Series Operation Manual

Operation Manual - Network Protocol
Quidway S3500 Series Ethernet Switches
Table 5-18 Configure DNS server addresses in DHCP address pools on multiple VLAN
interfaces
Assign DNS server addresses to DHCP
address pools on multiple VLAN interfaces
Remove one or all DNS server addresses
from DHCP address pools on multiple
VLAN interfaces
By default, no DNS server address is assigned to any global or VLAN interface address
pool.
If you configure DNS server list for multiple times, the latest DNS server list replaces
the previous one.

5.3.7 Configure NetBIOS Server Addresses for DHCP Clients

For a client running a Microsoft operating system, Windows Internet Naming Service
(WINS) server can resolve its hostname to IP address if the client communicates
through the NetBIOS protocol. Therefore, the setting of WINS is required on most
clients installed with Windows. Each DHCP address pool by far can contain up to eight
NetBIOS server addresses.
I. Configure NetBIOS server addresses in a global DHCP address pool
Perform the following configuration in DHCP address pool view.
Table 5-19 Configure NetBIOS server addresses in the global DHCP address pool
Configure NetBIOS server addresses in the
global DHCP address pool
Remove one or all NetBIOS server addresses
from the global DHCP address pool
II. Configure NetBIOS server addresses in the DHCP address pool on the
current VLAN interface
Perform the following configuration in VLAN interface view.
Operation
Operation
Huawei Technologies Proprietary
5-14
Chapter 5 DHCP Configuration
Command
dhcp server dns-list ip-address
[ ip-address ]
vlan-interface vlan_id
vlan-interface vlan_id ] | all }
undo dhcp server
{ ip-address | all } { interface
vlan-interface vlan_id
vlan-interface vlan_id ] | all }
Command
nbns-list
[ ip-address ]
undo nbns-list { ip-address |
all }
{ interface
[ to
dns-list
[ to
ip-address