Huawei Quidway S3500 Series Operation Manual page 430

Operation Manual - Integrated Management
Quidway S3500 Series Ethernet Switches
[Quidway] ntdp enable
[Quidway] interface ethernet 1/1
[Quidway-Ethernet1/1] ntdp enable
# Run the cluster function.
[Quidway] cluster enable
Note:
Upon the completion of the above configurations, you can use the cluster switch-to
{ member-num | mac-address H-H-H } command to switch to the member device view
to maintain and manage the member devices, and use the cluster switch-to
administrator command to resume the administrator device view. To reset a member
device through the administrator device, use the reboot member { member-num |
mac-address H.H.H } [ eraseflash ] command. For detailed information about these
configurations, refer to the preceding description of this chapter.
Huawei Technologies Proprietary
2-21
Chapter 2 HGMP V2 Configuration