Huawei Quidway S3500 Series Operation Manual page 587

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches
Table 4-14 Sending the configuration information to the console terminal.
Device
Switch
3) Sending the configuration information to monitor terminal
Table 4-15 Sending the configuration information to monitor terminal
Device
Switch
Configuration
Enable info-center
Set the information
output direction to
Console
Set information source
Enable terminal display
function
Configuration
Enable info-center
Set the information
output direction to
monitor
Set information source
Enable the terminal
display function and
this function for the
corresponding
information
Huawei Technologies Proprietary
Chapter 4 System Maintenance and Debugging
Default value Configuration description
By default, Other
info-center is valid only if the info-center is
enabled. enabled.
- -
You
modules and information to
be
time-stamp
- information, and so on. You
must turn on the switch of the
corresponding
before
debugging information.
You can view debugging
- information after enabling
terminal display function
Default value Configuration description
By default, Other
info-center is valid only if the info-center is
enabled. enabled.
- -
You
modules and information to
be
time-stamp
information, and so on. You
-
must turn on the switch of the
corresponding
before
debugging information.
For
dumb terminal, to view the
information, you must enable
-
the current terminal display
function using the terminal
monitor command.
4-10
configurations are
can define which
sent out and the
format of
module
defining output
configurations are
can define which
sent out and the
format of
module
defining output
Telnet terminal and